Gradall Forklift Part

Gradall Forklift Parts - The Gradall excavator was the brainchild of two brothers Koop and ray Ferwerda. The excavator was founded In the 1940's all through WWII, when there was a scarcity of labourers. Partners in a Cleveland, Ohio construction company referred to as Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when a lot of men left the workforce and signed up in the military, depleting existing workers for the delicate finishing work and grading on highway projects. The Ferwerda brothers opted to build an equipment which would save their company by making the slope grading job less manual, easier and more efficient.

The very first excavator prototype consisted of a device with two industrial beams on a rotating platform fixed to a used truck. There was a telescopic cylinder which was utilized to move the beams backward and forward. This allowed the fixed blade at the far end of the beams to push or pull the dirt. Soon improving the very first design, the brothers built a triangular boom to be able to add more strength. In addition, they added a tilt cylinder which let the boom rotate 45 degrees in both directions. A cylinder was placed at the back of the boom, powering a long push rod to enable the equipment to be equipped with either a blade or a bucket attachment.

Gradall introduced in 1992, with the introduction of the new XL Series hydraulics, the most innovative adjustment in their machines ever since their invention. This new system of top-of-the-line hydraulics enabled the Gradall excavator to deliver high productivity and comparable power to the more conventional excavators. The XL Series put an end to the initial Gradall equipment power drawn from low pressure hydraulics and gear pumps. These conventional systems efficiently handled grading and finishing work but had a difficult time competing for high productivity tasks.

Gradall's new XL Series excavators showed more ability to lift and dig materials. With this series, the models were produced with a piston pump, high-pressure system of hydraulics which showed marked improvement in boom and bucket breakout forces. The XL Series hydraulics system was also developed along with a load-sensing capability. Traditional excavators make use of an operator to choose a working-mode; where the Gradall system could automatically adjust the hydraulic power intended for the task at hand. This makes the operator's overall job easier and also conserves fuel at the same time.

When the new XL Series hydraulics became available in the market, Gradall was thrust into the extremely competitive industrial equipment market that are meant to tackle excavating, demolition, pavement removal and different industrial work. The introduction of the new telescoping boom helped to further enhance the excavator's marketability. The telescoping boom gives the excavator the ability to work in low overhead areas and to better position attachments.

Click to Download the pdf

Forklift Parts

Winch for Forklift

Forklift Winch - A winch is a mechanical tool which specializes in letting out, or winding out or pulling in or winding up the tension of a rope, wire cable, cable or a wire rope. It its most simple form it is made of a spool together with a connected hand crank. More complicated winches are found at the heart...

More

---

Forklift Mast Bearings

Mast Bearings - A bearing is a gadget which allows constrained relative motion between at least 2 components, usually in a rotational or linear procession. They could be generally defined by the motions they permit, the directions of applied cargo they can take and according to their nature of utilization. Plain bearings are normally used in contact with rubbing surfaces,...

More

---

Terex Parts

Terex Parts - Terex Forklifts stands by their goal to deliver a consistent and cost efficient product line. They take satisfaction in producing equipment that improves their customers' return on investment. Through numerous divestures and acquisitions planned to expand the product offering, Terex has of late expanded dramatically. They have improved their geographic coverage to make it possible for them...

More

---

Parts for Telehandler

Telehandler Parts - A telehandler or telescopic handler is an equipment which is normally utilized in industrial and agricultural applications. It has a similar appearance to a lift truck and even functions in a similar manner, even though, the telehandler is more of a crane than a forklift. It has a telescopic boom that could extend forward and upward from...

More

---

Walkie Stacker Part

Walkie Stacker Parts - Pallet stackers are a type of pallet jack that may be utilized to stack, transport and lift cargo positioned on a pallet that are far too heavy for physical lifting. Mainly these mechanisms are used to load and unload supplies from trucks and to transport pallets from one site to another within a stockroom of storage...

More

---

Simultaneous Fork Positioner

Simultaneous Fork Positioner - Load Protectors for lift trucks can help eliminate expensive scratching, chipping, scuffing and marring by means of providing a cushioned non-slip surface between the blades and goods. These kinds of attachments can be moulded according to OEM conditions from premium polyurethane. It is very fast to mount the Load Protectors because they fit right on top...

More

---

TCM Forklift Part

TCM Forklift Parts - In the global industry of material handling, lift trucks play an important role for transporting industrial goods. First innovated as industrial vehicles during the 1930s in America, forklifts gained recognition after WWII during the 1940s. Becoming a reliable and efficient means to material handling solutions, the need and practicality of these machines spread worldwide. First founded...

More

---

Container Handler Parts

Container Handler Parts - Forming the basis of containerization, shipping containers are part of a transfer system based on using steel intermodal containers (shipping containers). These containers are built to certain standard dimensions which could be stacked and transported, loaded and unloaded with optimum effectiveness over long distances. Shipping containers are usually transported by rail, semi-trailer trucks and ships without...

More

---