SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - Unavoidably, forklift parts will eventually wear out and need replacing. The alternative of buying new components can become expensive so one more idea is to buy used parts. This can save a lot of cash eventually. It is a good idea to acquire used lift truck parts that have been remanufactured. These components will guarantee that you are getting components that will work for a long time and be productive.
Broken or worn parts which are remanufactured are a very cost effective solution compared to rebuilding. With rebuilding parts, just the parts which are broken or worn out get changed, which means that other wearable parts may break down soon after acquisition.
Remanufacturing however offers the best guarantee for used components. Reproduced parts are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is one more rationale why remanufactured parts in general work so much better. Any component within the part is new and this provides far longer life to the used part. Depending on the forklift components which are being redone, the cleaning process and the whole remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Different engine parts like for instance rings, pistons, spark plugs, filters, valves, and valve springs can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are pressure washed, disassembled and oven cleaned. A thorough examination is done in order to check for any cracks. Bearings, bushings and seals are all replaced. Usually, the replacement components utilized on transmission parts meet OEM specifications.
Certain lift truck components such as the alternator, the water pump, torque converters, the starter and steer axles could be quite serviceable after worn components are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could also be remanufactured with replacing all aged and worn out parts. Unlike different forklift components the control card can only have the worn and aged components replaced.
Remanufactured components are comprehensively examined upon reassembly to guarantee they are in top condition prior to being sold. It is essential when purchasing reproduced parts to be sure they have undergone the proper testing and inspection procedures. On certain larger parts such as engines, transmissions and steer axles, OEM specification replacement components should be utilized.
The dealer of used lift trucks and parts could ensure that the remanufactured components have met OEM specifications and that these components meet industry standards. A lot of details go into remanufacturing used parts. This attention to detail offers more serviceability out of remanufactured parts compared to the components that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Wilmington, North Carolina
wilmingtonforkliftparts.com
Email Us
About Us